Skip to content

Turning “How Much for a Deck?” Into a Site Visit: 6 Lead Qualification Questions

By USA AI Corp · · 5 min read

The short answer

The lead qualification questions that matter for contractors are scope, photos, site access, timeline, budget range and who makes the decision. Ask them in two short rounds instead of one long form: what, where and photos first, then timing, budget and decision makers once the customer is engaged. Offer a site visit only when the answers fit your work.

The message arrives through Facebook at 6:15 AM: “how much for a deck.” No size, no photo, no town. A carpenter reading it in the truck knows the honest answer is “it depends,” and knows that answer helps nobody.

The usual next step is a week of back-and-forth, or a drive across the county to look at a yard where the budget turns out to be a third of what the job needs. The fix isn't a longer contact form. It's knowing which few questions decide whether a visit is worth your time, and asking them in a way that feels like help.

The six things you need before a visit

What to ask, why it matters, and wording that doesn't feel like an interrogation.
QuestionWhy it mattersHow to ask it
ScopeTells you if it's your kind of work at all“What do you have in mind? A sentence is fine, plus a rough size if you know it.”
PhotosShows height, attachment, condition and access before you drive“Could you send three photos: a wide shot, where it meets the house, and the ground or old deck?”
Site access and approvalsAffects equipment, delivery and labor, and whether an HOA or landlord can stop the job“Can we get to the spot from the driveway? Do you own the home, and is there an HOA that has to approve plans?”
TimelineSeparates real projects from someday ideas“When are you hoping to have it finished?”
Budget rangePrevents the visit where the gap can't be closed“Which range is closest to what you had in mind: under $[A], $[A] to $[B], over $[B], or not sure yet?”
Decision makerAvoids repeating the visit for a second person“Will anyone else be part of the decision? We like to meet everyone at once.”

Ask about the finish date rather than the start date. “Done before my daughter's graduation party in June” tells you more than “sometime in spring.” And put the budget ranges in your own numbers, based on what similar jobs actually cost you. A range question feels like guidance; an open “what's your budget?” feels like a trap.

Ask in two rounds, not one long form

Six questions at once reads like paperwork, and people who are only curious will skip it. Split them. The first reply asks only what you need to know whether the job is yours; the second asks the rest once the customer has shown they're serious.

Round one (sent within minutes)

“Thanks for asking about a deck. This is [Shop]'s automated assistant. To point you in the right direction: what do you have in mind, roughly what size, and what town is the house in? If you can, send three photos: a wide shot of the area, where it would meet the house, and the ground or the old deck. [Owner] reviews every request personally.”

Round two (after they answer)

“Thanks, that helps. Three more and we'll have what we need for a visit: when are you hoping to have it finished; which range is closest to your budget (under $[A], $[A] to $[B], over $[B], or not sure); and will anyone else be part of the decision? Last two: can we reach the area from the driveway, and do you own the home, or is there a landlord or HOA who needs to approve it?”

The same two rounds work on the phone. When an inquiry comes in as a call, ask round one before you hang up and text the photo request straight after; after a missed call, send round one as a text.

For an electrician, the same shape works with different specifics. An inquiry that says “need some outlets added” gets a round one asking what the outlets will power, which rooms, and a clear picture of the breaker panel, door open, without taking any cover off. For EV charger leads specifically, see our guide to screening EV charger inquiries by photo.

Flowchart

From vague inquiry to booked visit

  1. Start“How much for a deck?” arrives at 6:15 AM
  2. StepRound one asks what, roughly how big, which town, and for three photos
  3. DecisionIn your service area and the kind of work you do?
    No
    StepPolite decline from your approved template, with a referral if you have one
    Yes
  4. StepRound two asks finish date, budget range, decision makers and access
  5. DecisionIs the budget within reach, by the cost ranges you wrote for this job type?
    No
    A personOwner calls to reset expectations, rescope or decline
    Yes
  6. StepAnswers and photos are assembled into a one-page project brief
  7. A personOwner reads the brief and approves a visit
  8. DoneVisit booked with everyone who decides, and a prep checklist sent
Two rounds of questions build the brief, the budget check uses cost ranges the owner wrote for each job type, and the owner decides which leads get a visit, a call or a polite no.

The project brief that replaces the message thread

The point of all this is a single page you can read in a minute before deciding. Whether you compile it yourself or have it built automatically from the replies, it should look something like this hypothetical example:

  • Project: replace a 12 × 14 ground-level deck, wants composite boards, keep the existing steps if sound
  • Location: about 25 minutes from the shop, inside the service area
  • Photos: four, showing rot at the ledger board and a side-gate access route
  • Finish by: before Memorial Day weekend
  • Budget: chose the middle range
  • Decision: both homeowners, both available weekday evenings
  • Open questions: permit history of the old deck; whether the ledger flashing needs replacing

Before and after

One inquiry, two paths

Answer it when you can

  1. 01Owner replies at lunch asking for details
  2. 02Customer answers half the questions two days later
  3. 03Visit booked without photos or a budget
  4. 04On site, the budget is a third of the job

ResultHalf a day gone and no project

Two rounds and a brief

  1. 01Round one goes out within minutes
  2. 02Photos and town come back that morning
  3. 03Round two settles timing, budget and decision makers
  4. 04Owner reads one page and approves a visit

ResultVisits go to projects that can happen

The same Facebook message, handled with and without a qualification routine.

When to visit, call first or decline

  • Book the visit when the job is in your area and your trade, the budget range is within reach, the finish date is realistic and everyone who decides can be there.
  • Call first when the budget and scope are far apart, the photos raise questions, or the project is unusual. Ten minutes on the phone is cheaper than a wasted drive.
  • Decline when it's outside your area or your work, or when the budget can't stretch and the customer doesn't want to adjust the scope.

A decline can still leave a good impression: “Thanks for sending the details and photos. This one isn't a good fit for us, because [reason in one line]. You might try [referral], who does this kind of work. If you have a project like [your specialty] down the road, we'd be glad to help.” Have it approved once, then reuse it.

Pitfalls and guardrails

  • Quoting from photos. Photos decide whether to visit, not what to charge. Any number before a visit should be a range you've approved for that job type.
  • Twelve-field forms. Every extra required field gives a casual browser a reason to leave. Keep round one to what, where and photos.
  • Skipping the decision maker. A visit with one of two homeowners often means a second visit.
  • Deposits before paperwork. Don't take money until there's a written contract, and check your state's limits. California, for example, caps the down payment on a home improvement contract at $1,000 or 10% of the price, whichever is less. Deposit and contract rules are set state by state, and this is general information rather than legal advice.

This two-round routine is what our lead follow-up service runs for carpenters: the questions go out on their own, and you read the brief and make the call. Speed matters too, so pair this with our notes on replying to leads fast.

Sources

Common questions

Quick answers.

What questions should a contractor ask a potential client?

Six cover most jobs: what they want done and roughly how big, photos of the area, how you'll reach the site, when they want it finished, a budget range and who makes the decision. Ask the first three right away and the rest once the customer replies.

How do you ask a customer about their budget without being rude?

Offer ranges instead of an open question. “Which range is closest to what you had in mind?” with three ranges from your own past jobs, plus “not sure yet,” feels like guidance. It also tells the customer what similar projects really cost before anyone drives out.

Should contractors charge for estimates?

That's your call, and both approaches can work. Some contractors keep visits free for qualified leads and charge for design work or drawings; others charge a visit fee and credit it to the job. Screening with a few questions first makes free visits far more sustainable, because you only make the ones likely to become jobs.

How do I politely turn down a job?

Thank them for the details, give a one-line honest reason, suggest someone better suited if you can, and mention the kind of work you'd love to do for them later. Keep the wording approved in advance so declines go out quickly and consistently.

Put it to work

Automated lead follow-up

AI lead follow-up that replies to every inquiry within minutes, qualifies it and books the call, and keeps customers hearing from you on dates you approve.

See how it works

Most relevant for carpenters, electricians.

Keep reading

Ready when the work is.

Show us what is slowing your business down.

Book a call

Not ready to talk?

Written brief

Skip the call.
Send a brief.

A few sentences is plenty. We read every brief and reply by email within one business day.

Try it free. If you love it, keep it. If it's not for you, we take it back, no questions asked.

We only use this to reply to you. Privacy policy